Q5

 379.99

  • BGN: 743.18лв.

Category:

Description

Specifications

General
Model Q5 Color Titanium
Weight About 195g Dimensions About 124mm x 64mm x 16mm
Audio Input Standard 3.5mm Port (Shared Line / Coaxial/ Optical in) Digital Coaxial Input Port Standard 3.5mm Port (Shared Line / Coaxial/ Optical in)
Digital/Optical Input Port Standard 3.5mm Port (Shared Line / Coaxial/ Optical in) USB Port

11-pin Micro USB at the bottom side,  for data exchanging and charging 

5-pin Micro USB on the left side, for charging only by default

(Can be interchanged via App)

Analog Input port(LO) Standard 3.5mm stereo jack Headphone Output Port Standard 3.5mm stereo jack
Balanced Output Port 2.5mm port Recommended Headphone Impedance

16~150Ω(PO)

16~300Ω(BAL)

Channel Balance 0.1 dB Gain

Yes(High/Low)

Bass Boost Up to 384kHz/32bit supported Volume Control Potentiometer(ADC Sampling)
Power Supply DC5V 2A (Recommended) Battery Capacity 3800 mAh
Charge Time ≤3.5 h (DV5V 2A,USB port on the side) Battery Life >25 h (AUX IN)
>10 h (USB IN)
>10 h (OPT IN)
>10 h (COAX IN)
>10 h (Bluetooth  IN)
Charging Indicator Red light flashes when being charged

Red light goes off after fully charged

Low Battery Warning Red light flashes twice every 3 seconds
Bluetooth Bluetooth 4.2, supports aptX, AAC, SBC MFi Yes
Sampling Rate Supported Up to 384kHz/32bit(USB IN)
192KHz/24bit(COAX IN)
96KHz/24bit(OPT IN)
DSD Support(USB IN) DSD64/128/256
Chips Used DAC: AK4490EN * 2  , USB:  XMOS   XU208 ,   Bluetooth: CSR8670 ,  LPF:OPA1642×2,Volume IC:NJW1195  OP+AMP:AD8620+OPA926
Line output specifications
THD+N <0.001% (1 kHz/10kΩ) SNR ≥115 dB (A-weighted)
Frequency Response 5 Hz~90 kHz(-3dB) Channel Separation >97 dB (1 kHz)
Line level 1.8 Vrms
AM3A Headphone out specifications (3.5mm headphone out jack)
Output Power 1 ≥230 mW(16Ω / THD+N<1%) Output Impedance <1.4Ω (32Ω loaded)
Output Power 2 ≥160 mW(32Ω /THD+N<1%) Channel Separation ≥73 dB (1 kHz,AUX IN)
Output Power 3 ≥24 mW(300Ω / THD+N<1%) THD+N <0.001% (1 kHz)
Frequency Response 5 Hz~50 kHz(-3dB) Peak Output Voltage >6 Vp-p
SNR ≥115 dB (A-weighted) Max. Output Current 150mA (For reference)
Max. Input Level 3.8 Vrms
Balanced headphone out specifications (2.5mm TRRS headphone out jack)
Output Power 1 ≥470 mW(16Ω / THD+N<1%) Output Impedance <2Ω (32Ω loaded)
Output Power 2 ≥440 mW(32Ω /THD+N<1%) Channel Separation ≥99 dB (1 kHz,AUX IN)
Output Power 3 ≥93 mW(300Ω / THD+N<1%) THD+N <0.001% (1 kHz)
Frequency Response 5 Hz~50kHz(-3dB) Peak Output Voltage >10.5 Vp-p
SNR ≥115 dB (A-weighted) Max. Output Current 150 mA (For reference)
Max. Input Level 3.8 Vrms

Frequency Response diagram of curves 1.
Test condition:Input 0.9V,  AUX IN, High Gain, Bass=Off, 3.5mm headphone output (32Ω loaded)
Blue curve: Left channel , Red curve: Right channel

Frequency Response diagram of curves 2.
Test condition:Input = 0.45V,  AUX IN, High Gain, Bass= Off, 2.5mm headphone output (32Ω loaded)
Blue curve: Left channel , Red curve: Right channel

Frequency Response diagram of curves 3.
Test condition:USB IN, Lineout(10 kΩ loaded)
Blue curve: Left channel , Red curve: Right channel

Frequency Response diagram of curves 4.
Test condition:USB IN, High Gain, Bass= Off, 3.5mm headphone output (32Ω loaded)
Blue curve: Left channel , Red curve: Right channel

Frequency Response diagram of curves 5.
Test condition:USB IN, low Gain, Bass=Off, 2.5mm headphone output (32Ω loaded)
Blue curve: Left channel , Red curve: Right channel

Distortion diagram of curves 1.

Test condition:play -5 dB sinusoidal signal,AUX IN, High Gain, Bass = OFF

3.5mm headphone output

Distortion diagram of curves 2.

Test condition:play -5 dB sinusoidal signal,AUX IN, High Gain, Bass = OFF

2.5mm headphone output

Distortion diagram of curves 3.

Test condition:play -5 dB sinusoidal signal,USB IN

3.5mm Headphone output

Distortion diagram of curves 4.

Test condition:play -5 dB sinusoidal signal,USB IN

2.5mm Headphone output

Reviews

There are no reviews yet.

Be the first to review “Q5”

Your email address will not be published. Required fields are marked *